Sea Sponge Dewatering Pump
The Sea Sponge Dewatering and Drainage Pump excels at removing collected water from flat surfaces, or runoff, rainwater, and seepage from the backside of your Garrison flood barrier, ensuring your property remains protected and dry.
With its powerful pumping capabilities, our pump efficiently drains accumulated water down to .04 inches, low enough to pump even small puddles and to send the water back over your flood barrier. Whether you are dealing with flood emergencies or routine water removal, the Sea Sponge Dewatering Sump Pump is your reliable solution.
Pumps/Drains Water Down to .04”
Durable, Reliable and Effective
Integrated Safety Features
Sea Sponge Dewatering and Drainage Pump Features:
Discharge Port:
Vertical or Horizontal positioning of the discharge port depending on the exact needs of your application and can be used with a 3/4” garden hose.
Air Circulation:
With the flap valve closed the pump is cooled by internal air circulation, which allows the pump to run dry for extended periods.
Flap Valve:
Prevents the back flow of water through the pump.
How To Use:
Prime the Pump with at least 85oz of Water
Place Pump in Desired Location
Attach Standard Garden Hose
Why Choose The Sea Sponge Dewatering Pump?
Efficient Water Drainage:
Pumps water down to 0.04 inches, tackling even the smallest puddles.
Capable of pumping 45 gallons per minute with a maximum head of 39 feet.
Durable and Reliable:
Built to withstand harsh conditions and prolonged operation.
Constructed with high-quality materials including Ethylene Propylene Rubber, Urethane Rubber, and 403 Stainless Steel.
Versatile Applications:
Perfect for emergency flood control, draining flooded areas, and removing standing water from flat roofs, basements, or crawl spaces.
Ideal for dewatering construction sites and other demanding environments.
Product Material Specs
Casing - Ethylene Propylene Rubber
Impeller - Urethane Rubber
Shaft - 403 Stainless Steel
Motor Frame - Aluminum Alloy
Fasteners -304 Stainless Steel
Upper & Lower Seal - Silicon Carbide
Elastomers - Nitrile Butadiene Rubber
Voltage/Amp - 110/6.1
Product Specifications
Applications
Emergency Flood Control
Drainage of Flooded Areas
Removal of Standing Water
Interior Water Drainage
Dewater Construction Sites
-
-
The Sea Sponge dewatering and drainage pump is designed for complete dewatering of flat surfaces. It can pump down to the floor level, making it ideal for removing even the smallest puddles. We recommend using it behind our Garrison flood barriers to remove any rainwater or seepage that may collect.
-
The pump can reduce water levels down to 0.04 inches, effectively removing nearly all water from the surface.
-
The pump features a Urethane, Semi Vortex Impeller, and Wear Plates, which provide maximum durability while maintaining performance. It also includes a dual inside mechanical seal with SiC faces for a longer operational life.
-
Key features include an internal check valve to maintain prime, an oil lifter for seal lubrication, and a V-Ring Seal design to protect against abrasive particles.
-
The pump has a motor output of 2/3 HP, suitable for most dewatering applications.
-
The pump measures 7-11/16 inches in diameter and 12-7/16 inches in height, with a weight of 29 lbs.
-
Yes, the pump features a design that allows for priming through the discharge outlet, enabling start-up at any water level. The pump must be primed before using.
-
The pump requires minimal maintenance due to its durable construction and features like the oil lifter that ensures consistent lubrication.
-
Yes, the pump is designed for continuous operation at a water level of 0.04 inches, making it efficient for prolonged dewatering tasks.
-
The pump is ideal for dewatering flat surfaces, construction sites, basements, and any area where complete drainage and dewatering is required. It is also suitable for removing water that collects behind Garrison flood barriers from rainwater or seepage.
-
The pump operates on a 110V power supply and requires 6.1 amps, making it suitable for standard electrical outlets.
-
We recommend using a traditional ¾” garden hose.
-
The motor is designed with vents and cooling fans to allow airflow over the motor windings and housing. This helps carry away heat.
-
Yes, this pump can be used indoors or outdoors - but you need to plan for a power source to power the pump. This can be a generator or a standard power outlet.
-
Yes, the pump is equipped with a check valve that, once primed, allows the user to move from one puddle to the next without losing the prime.
-
The amount varies depending on length of output hose - 13.2 ~ 45.0 GPM. (0.05 ~ 0.17 m /min).
-
Voltage/Amp: 110/6.1
-
For most effective pumping, we recommend placing the Sea Sponge at the low point, positioned to capture any water that will naturally flow to the lowest point of an area.
-
If you are using the pump to remove salt water, we recommend fully flushing the pump with fresh water after use and wiping down the components. Salt water will corrode and break down components if not properly maintained.
-
Yes, we have a Surface Level Switch that can attach to the pump and will automatically turn the pump on when water is detected, as well as turn off.
