Sea Sponge Automated Drainage Pump Accessory - Surface Level Switch
The Surface Level Switch is used to automate water drainage with the Sea Sponge Dewatering Pump. When water touches the “On Probe”, the pump will turn on. A 10-second timer keeps the pump running when water is no longer touching the "Off Probes".
The switch is filled with epoxy so it can be completely submerged in water and operate effectively. Set the Surface Level Switch on the floor and plug the power cord from the pump into the piggyback plug on the switch. Plug the piggyback plug into a standard 120 VAC wall/15 Amp outlet (the unit will also work on GFI outlets).
Switch activates when 0.375" of water is present and deactivates when water is cleared to 0.125". Recommended for deployment of pump when not present. This product is for use with the Sea Sponge Dewatering Pump (GP-LSC1).
Automated pump accessory, no manual intervention
Waterproof epoxy-filled electronics
Wide base for stability
Stainless steel water detection probes
Screws for leveling or height adjustments if needed
This item ships FREE within the continental United States!
The Surface Level Switch is used to automate water drainage with the Sea Sponge Dewatering Pump. When water touches the “On Probe”, the pump will turn on. A 10-second timer keeps the pump running when water is no longer touching the "Off Probes".
The switch is filled with epoxy so it can be completely submerged in water and operate effectively. Set the Surface Level Switch on the floor and plug the power cord from the pump into the piggyback plug on the switch. Plug the piggyback plug into a standard 120 VAC wall/15 Amp outlet (the unit will also work on GFI outlets).
Switch activates when 0.375" of water is present and deactivates when water is cleared to 0.125". Recommended for deployment of pump when not present. This product is for use with the Sea Sponge Dewatering Pump (GP-LSC1).
Automated pump accessory, no manual intervention
Waterproof epoxy-filled electronics
Wide base for stability
Stainless steel water detection probes
Screws for leveling or height adjustments if needed
This item ships FREE within the continental United States!
The Surface Level Switch is used to automate water drainage with the Sea Sponge Dewatering Pump. When water touches the “On Probe”, the pump will turn on. A 10-second timer keeps the pump running when water is no longer touching the "Off Probes".
The switch is filled with epoxy so it can be completely submerged in water and operate effectively. Set the Surface Level Switch on the floor and plug the power cord from the pump into the piggyback plug on the switch. Plug the piggyback plug into a standard 120 VAC wall/15 Amp outlet (the unit will also work on GFI outlets).
Switch activates when 0.375" of water is present and deactivates when water is cleared to 0.125". Recommended for deployment of pump when not present. This product is for use with the Sea Sponge Dewatering Pump (GP-LSC1).
Automated pump accessory, no manual intervention
Waterproof epoxy-filled electronics
Wide base for stability
Stainless steel water detection probes
Screws for leveling or height adjustments if needed
This item ships FREE within the continental United States!
Shipping Info:
1 Pack: 9” x 9” x 4” @ 4 lbs via UPS Ground
For bulk orders, alternate pack sizes, international inquiries, and orders to Hawaii or Alaska, please CONTACT US.
